Whirlpool 30" Freestanding Gas Range Installation Instructions Manual
Whirlpool 30" Freestanding Gas Range Installation Instructions Manual

Whirlpool 30" Freestanding Gas Range Installation Instructions Manual

30" freestanding gas range with standard clean oven

Advertisement

Installation Instructions
30" Freestanding
A child or adult can tip the range and be
killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range
is moved.
Failure to follow these instructions can
result in death or serious burns to children
and adults.
Gas
Range
with standard clean oven
WARNING
Tip Over Hazard
Quick Reference
Table of Contents:
Pages
2
Before you start
Product dimensions
2
Cabinet dimensions/requirements
2
Gas supply requirements
3
Installation steps
4 - 6
Gas conversions
7 - 8
If range does not operate
Back cover
If you need assistance/service
Back cover
Moving the range
Back cover
If you need assistance:
Check your Use and Care Guide for a toll-free number to call or call the
dealer from whom you purchased this range. The dealer is listed in
the Yellow Pages of your phone directory under "Appliances —
Household — Major — Service and Repair."
Call when you:
Have questions about range installation or operation.
Need to obtain the name and number of an authorized
service company.
When you call, you will need:
The range model number.
The range serial number.
Both numbers are listed on the model/serial rating plate located on the
frame behind the broiler door.
IMPORTANT:
Read and save these instructions.
IMPORTANT:
Installer: Leave Installation Instructions with the homeowner.
Homeowner: Keep Installation Instructions for future reference.
Save Installation Instructions for local electrical inspector's use.
Part No. 8053705 Rev. A

Advertisement

Table of Contents
loading

Summary of Contents for Whirlpool 30" Freestanding Gas Range

  • Page 1 Installation Instructions 30" Freestanding Quick Reference Table of Contents: Range Pages Before you start with standard clean oven Product dimensions Cabinet dimensions/requirements Gas supply requirements Installation steps 4 - 6 Gas conversions 7 - 8 If range does not operate Back cover If you need assistance/service Back cover...
  • Page 2: Product Dimensions

    Before you start... Product dimensions Your safety and the safety of Proper gas supply connection must be others are very important. available. See “Gas We have provided many important safety supply requirements,” message in this manual and on your Page 3. appliance.
  • Page 3: Tools Needed

    Tools needed: level Materials required: • gas line shutoff valve • 1/2" male pipe thread nipple for connection to pressure regulator hand or 3/8" drive gloves electric drill Phillips • L.P. gas-resistant pipe-joint compound ratchet screwdriver • AGA or CSA design-certified flexible metal appliance connector (4-5 feet) or rigid gas supply line as needed •...
  • Page 4: Installation Steps

    Check cooktop burners for proper flame Make proper Remove shipping gas connection material. Remove oven racks and parts package. Install anti- tip bracket Secure range with anti-tip Level range bracket Close broiler drawer Check burner operation Installation steps Preparation Put on safety glasses and gloves. Do Not WARNING use oven door handle to lift or move the range.
  • Page 5: Operating Position

    Before moving range across floor, check that Operating position range is still on cardboard shipping base to protect floor covering. front leveling leg Making sure the anti-tip bracket is installed: anti-tip • Look for the bracket anti-tip bracket range foot securely attached to Place rack in oven.
  • Page 6: Check Operation

    Check operation Check operation of cooktop Check operation of You have just finished installing oven/broil burner your new range. To get the most efficient use from your range, read your Use & Care Guide. Open broiler drawer. Keep Installation Instructions and Guide close to range for easy reference.
  • Page 7: Natural Gas Conversion

    Gas conversions Natural gas conversion Gas conversions (from Natural gas to L.P. gas; or Remove and orifice spuds from L.P. gas to Natural gas) must be done by a replace orifice spuds. qualified installer. Check that the manual shutoff valve in notches WARNING the gas supply line has been turned off.
  • Page 8 Remove and orifice spuds replace orifice spuds. notches L.P. manifold L.R. L.F. R.F. R.R. Locate Natural gas orifice spuds in literature package included with the range. All Natural gas orifice spuds are stamped with “54”. Remove L.P. gas orifice spuds using a 3/8" combination wrench.
  • Page 9: If You Need Service

    If range does not operate: Moving the range: Check that gas line is turned on. When moving range, slide range onto cardboard WARNING See Use and Care Guide for troubleshooting list. or hardboard to prevent damaging the floor covering. If you need assistance: If removing the range is necessary for cleaning If you have questions about operating, cleaning or maintenance:...

Table of Contents