Shark S3550 Owner's Manual page 5

5
QUICK
TIP: For
easier
pushing
and pulling,
extend the
handle length
6
PREPARE
5
For your comfort, you can adjust
the height of the mop. Just lift the
latch on the tube 90 degrees to the
open position. Holding the handle,
extend the tube to the height that's
right for you and then close latch to
locked position.
6 Plug in mop and wait 30 seconds
or less for the mop to heat up.
Pump the handle of the mop by
pushing downward about 10 to 12
times to create steam.
NOTE: Steam is created
automatically when you start
mopping.
DIRT CAN'T HIDE ON
EITHER SIDE! All new
design allows for optimal
cleaning! When one side
of the pocket gets dirty,
just turn the mop head
over and clean with the
other side of the pocket.
QUICK TIP: We've added
additional mop heads for your
convenience. Each mop head
can be used on your floors.
The Triangle Mop Head was
specifically designed to reach into
those tight corners and spaces,
especially those found in the
bathroom. The XL Mop Head was
designed to make quick work of
large open spaces. The Rectangle
Mop Head is completely versatile.
NOTE: Do not leave your Steam
Mop unattended during use.
IMPORTANT: Never leave the
steam mop in one spot for any
period of time with a damp or wet
micro-fiber pocket attached as
this will damage your floors.
www.sharkclean.com