12. DO NOT put any objects into 25. To avoid circuit overload, do not openings. Do not use with any operate another appliance on WHEN USING YOUR SHARK 1. Use the system only for its opening blocked. the same socket (circuit) as the intended use.
When one side all our steam mops 100% before you of the pocket gets dirty, buy them, so you get a quality just turn the mop head Shark ® Steam Mop. over and clean with the QUICK other side of the pocket.
Using Your Steam Mop ..............5 This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage the Shark ® Using Your Carpet Glider ............. 7 Directive (LVD) 2006/95/EC and its revisions.
When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark ® Steam Pocket Mop. 2 Rectangle Cleaning Pads...
If you have hard water you using the mop for the first time, it might want to use distilled water to might take longer than the normal prolong the life of the Shark ® Steam 30 seconds to start steaming. Just Mop.
Using Your Steam Mop - cont’d Using Your Carpet Glider The Steam Mop won’t clean your carpeting or area rugs. However, it’s great for deodorizing and freshening. For your comfort, you can adjust the When the water tank is empty, the THE CARPET GLIDER height of the mop.
KEEPING YOUR MICRO-FIBER Remove the micro-fiber cleaning To store the Shark ® Steam Mop If there are loose threads on the pocket by releasing the quick hanging up; first remove the head...
Troubleshooting Guide Ordering Replacement Parts PROBLEM POSSIBLE REASONS & SOLUTIONS Your Steam Mop should be securely plugged into a 127V electrical outlet only. The Steam Mop will not turn on. Check your fuse or breaker. If your unit still doesn’t work, give us a call at ????????????. Steam Mop will not Prime the pump, see page 4 for more information.