Audio Menu - Sony PMW-F55 Operating Instructions Manual

Audio Menu

Audio
Menu items Sub items and setting values Contents
Audio Input MIC CH1 Ref
–60dB / –50dB / –40dB
Setting for audio
inputs
MIC CH2 Ref
–60dB / –50dB / –40dB
Note
Limiter Mode
This item cannot
Off / –6dB / – 9dB / –12dB /
be selected when
–15dB / –17dB
removing the
1KHz Tone on Color Bars
audio connector
On / Off
panel.
CH-1 Wind Filter
On / Off
CH-2 Wind Filter
On / Off
Audio Level
CH-1 Audio Select
Auto / Manual
Setting for audio
recording level
CH-2 Audio Select
Auto / Manual
Notes
CH-1 Audio Level
• This item cannot
–99 to +99 (±0)
be selected when
CH-2 Audio Level
removing the
–99 to +99 (±0)
audio connector
panel.
AGC Spec
• The recording
–6dB / –9dB / –12dB /
level for the
–15dB / –17dB
channel that the
AGC Mode
AES/EBU signal
Mono / Stereo
is selected is
locked.
Audio Output Output CH
CH-1/CH-2
Setting for audio
CH-3/CH-4
outputs
Monitor CH
When "Output CH" is set to
"CH1/CH2"
CH-1/CH-2
CH-1
CH-2
When "Output CH" is set to
"CH3/CH4"
CH-3/CH-4
CH-3
CH-4
Headphone Out
Mono / Stereo
Monitor Level
0 to 99
Selects the reference input level for when the AUDIO IN CH1
switch is set to MIC.
Selects the reference input level for when the AUDIO IN CH2
switch is set to MIC.
Selects the limiter level when a loud signal is input while
setting audio input level manually.
When you do not use the limiter, select "Off."
Turn the 1-kHz reference tone signal on/off.
Turn the wind filter for the channel 1 on/off.
Turn the wind filter for the channel 2 on/off.
The audio recording level is adjusted automatically when you
set to "Auto."
The audio recording level is adjusted automatically when you
set to "Auto."
Adjusts the audio recording level when "CH-1 Audio Select"
is set to "Manual."
Adjusts the audio recording level when "CH-2 Audio Select"
is set to "Manual."
Selects the AGC level.
Selects auto adjusting method for the input level of an analog
audio signal recorded to CH-1/CH-2 from "Mono" (performs
for each channel) and "Stereo" (performs in stereo mode).
Selects audio output channels from either channels 1 and 2 or
channels 3 and 4.
Selects the audio channel(s) to be fed to the headphones and
the built-in speaker.
CH-1/CH-2 (CH-3/CH-4): Stereo
CH-1 (CH-3): CH-1 (CH-3) only
CH-2 (CH-4): CH-2 (CH-4) only
Selects the headphones output, "Mono" or "Stereo."
Adjusts the monitor level.
Setup Menu List 69