Sony PMW-F55 Operating Instructions Manual page 40

Note
When connecting the camcorder and AXS-R5, only EE*
is output from the AUX OUT connector of the AXS-R5.
Playback picture is not output. Playback picture is output
from the camcorder.
* EE is not output while in the Slow & Quick Motion
mode.
Clip (recording data)
When you stop recording, video, audio and
subsidiary data from the start to end of the
recording are recorded as a single clip on an
SxS memory card.
Clip name
For each clip recorded with this camcorder, a
clip is named by the naming mode that is set in
"Clip Naming" (page 78) of the Media menu.
The Shot Number and clip number are
automatically incremented.
When storing the clip name by the "Cam ID +
Reel#" naming mode (page 78), the clip name is
created as follows:
• When there is already a clip name that is
stored by the "Cam ID + Reel#" naming mode
on the inserted AXS memory card, the new
file inherits its information.
Examples:
When "B002C003_XXXXXXXX" is on the AXS
memory card, the next created clip name is
"B002C004_XXXXXXXX." The Camera ID of
"AXS Recorder" in the System menu is changed to
"B," and Reel Number is changed to "002." The clip
name on the information that is displayed during
shooting flashes until the camera starts recording.
• When the inserted AXS memory card has no
file, "1" is added to the Reel Number of the
clip that was recorded last.
Examples:
When you record on empty card "2" after recording
up to "D001CXXX_XXXXXXXX" on card "1," the
next created clip name is
"D002C001_XXXXXXXX." The clip name on the
information that is displayed during shooting flashes
until the camera starts recording.
• When you set the Camera ID and Reel
Number of "Clip Naming" in the Media
menu, that information is applied.
Examples:
When you change the Camera ID to "F" and Reel
Number to "001" of the AXS memory card that is
recorded up to "E003CXXX_XXXXXXXX," the
next clip name is "F001CXXX_XXXXXXXX."
When you change the Camera ID only, the Reel
Number is changed to "001."
40 Basic Operation Procedure
When storing the clip name by the "Title"
naming mode (page 78), the clip name is
created from characters that are set in "Title
Prefix" (1 to 46 characters) + clip number that
is set in "Number Set" (0001 to 9999).
Maximum duration of a clip
The maximum clip length is 6 hours.
If you exceed the maximum clip length, a new
clip will be automatically created. You can
check the new clip on the thumbnail screen.