Gauges; Throttle Control; Ignition; Hour Meter - Husqvarna BZ 27 Operator's Manual

Gauges

Water temperature gauge- indicates coolant
temperature and warns of overheat situation.
Ammeter - indicates amount of electrical flow
at the battery. Under normal operating
conditions the needle will be slightly on the
plus (+) side of the gauge, showing that
current is being supplied to the battery. At idle
speed, the indicator may be at zero or on the
negative (-) side. A continuous negative
reading at normal operating speed indicates
a malfunction in the charging system that
should be checked immediately.
Oil pressure meter - tells what the pressure is
in the oil system and warns if pressure is too
low for operation.

Throttle Control

The throttle control regulates the engine
speed.
In order to increase or decrease the engine
speed, the control is moved forward or
backward respectively.
Avoid idling the engine for long periods.
Use full throttle when mowing.

Ignition

The ignition key is placed in the front console
and is used to start the machine.
IMPORTANT INFORMATION
Wait till the glow plug light goes out before
turning the engine over. To prolong starter
life use short starting cycles, DO NOT
exceed 30 s/min.

Hour Meter

The hour meter displays the totoal operating time
and reminds of service intervals.
It will flash CHG OIL (Change Oil) at 50 hour
intervals. The flash duration is one hour before
and one hour after the interval. The CHG OIL icon
will come on and shut off automatically. The hour
meter can not be manually reset.
18
English-
CONTROLS
Gauges
1. Water temperature
2. Ammeter
3. Oil pressure
Throttle control
1. Throttle control
1
Console
1. Hour meter
2. Glow plug light
3. Ignition
1 2
3
1
BAM-2
BAM-2
2
3
BAM-3