Chapter 2 - Getting Started; Out Of The Box - Honeywell Dolphin 6100 User Manual

2
Getting Started

Out of the Box

Verify that your carton contains the following items:
• Dolphin 6100 mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see
Service and Repair
Step 1. Install the Main Battery
The Dolphin 6100 is shipped with the battery packaged separate from the unit. Follow the steps below to
install the main battery.
1. Release the strap making it convenient to reach the door.
2. Remove the battery compartment door by turning the door's pins upward and removing the door.
3. Insert the battery into the battery well with the labels facing upward.
4. Replace the door with a hinging motion and turn the pins downwards.
Note: The battery door must be installed prior to booting the unit.
5. Tighten the hand strap.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not
covered by the warranty.
on page 12-1.
Product
Cover Locks
Main Battery
2 - 1