Chapter 1 - Getting Started; Out Of The Box; Dolphin 99Ex/99Gx Terminals; Initial Setup - Honeywell Dolphin 99EX User Manual

1
Getting Started

Out of the Box

Verify that the carton contains the following items:
• Dolphin mobile computer (the terminal)
• Main battery pack
• Product documentation
If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to
keep the original packaging in the event that the Dolphin terminal should need to be returned for service.
For details, see Customer Support

Dolphin 99EX/99GX Terminals

Dolphin 99EX and 99GX model terminals are designed for use with standard battery pack model 99EX-
BTSC (Li-poly 3.7V, 11.3 watt hour) and extended battery pack model 99EX-BTEC (Li-ion 3.7V, 18.5
watt hour) manufactured for Honeywell International Inc.
Dolphin 99EX and 99GX model terminals are not designed for use in hazardous locations.
Note: Before installing the main battery pack, read the

Initial Setup

Step 1. Install the Main Battery Pack
The terminal is shipped with the battery packaged separate from the unit. Follow the steps below to
install the main battery. For information on how to remove the battery, see
Pack on page 1-4.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
damage not covered by the warranty.
1. Release the hook securing the hand strap to the back panel of the terminal near the speaker (99EX
models only).
2. Remove the battery door by lifting up the latches near the base of the battery door.
Note: The battery door is loosely secured to the hand strap on 99EX models or a short unit tether on
99GX models to prevent battery accidental door loss.
3. Insert the battery into the battery well.
on page xi.
Guidelines for Battery Pack Use and Disposal
2
on page 2-14.
Replacing the Main Battery
3
1 - 1