Front Panel
Terminal Well
Terminal Well
Place the Dolphin terminal in the terminal well to communicate with a host device, power the
terminal, and charge the terminal's battery. Make sure that the device is securely seated.
Rubber Feet
The bottom panel has four rubber feet to stabilize the unit on a flat surface. You can set the
base on a dry, stable surface, such as a desktop or workbench near an electrical outlet.
Back Panel
HomeBase
Serial Port
USB Port
DC Power Jack
Connect the power cable to this power jack; see
page
9-3.
9 - 2
DC Power Jack
DC Power Jack
Serial Port
USB Port
Ethernet Port
Powering the Dolphin HomeBase Device
Charging LED
eBase
DC Power Jack
on