Table of Contents
Advertisement
Safety Instructions
No contact while working, or right after the
lamp is off since the exhaust port and the
lamp lid generate heat.
Don't block the exhaust vent with things
like a tablecloth.
It makes internal temperature increase and caus-
es danger of fire.
Never touch the power plug with wet hand.
It may cause electric shock.
Don't place the power cord near the hot
things like a heater.
It may make covering parts melted and cause fire
or electric shock.
5
NOTES
Don't use the projector on the unstable
place.
It may fall down or be upset.
Be sure to turn the power switch off and
unplug the power when moving the projec-
tor. And check if other external connecting
cables are removed.
Damage of cords may cause
fire or electric shock.
Don't use chemical detergents like alcohol,
benzene, or thinners for cleaning plastic
parts like the casing of the projector.
Particularly, never use chemical detergents
like the polisher for car or
industrial use, an abrasive,
a wax, benzene, alcohol,
thinners, a mosquitocide,
an anticorrosive,
a lubricant, or a
washing cleaner.
Hold the plug tightly when unplugging.
If you hold the cord when unplugging , the internal
line of the cord may be cut. This may cause heat-
ing and fire.
Advertisement
Table of Contents
