Table of Contents
Advertisement
Turning on the Projector
1
Remove the lens cover of the projector.
2
Press the
POWER
during warming up of the lamp.)
It will take about 1 minute to display the picture after power on because the lamp of the projector
needs preheating.
An image appears after the green operation indicator is flashed for some time.
Select the source mode with the
3
Adjust volume level.
If you press
If you press
25
button on the remote control or top cover.(Green operation indicator flashes
SOURCE
G button, sound and volume level number are increased.
VOLUME
F button, sound and volume level number are decreased.
VOLUME
24
* Don't unplug the power cord while the ventilation pan(inlet/outlet) is working.
button.
Advertisement
Table of Contents
