Volvo XC60 Owner's Manual page 341

1
Extra high beam
1. Remove the headlight housing from the
vehicle (see page 336).
2. Remove the cover over the bulbs (see
page 337).
3. Disconnect the wiring connector from the
bulb holder.
4. Remove the bulb holder from the head-
light housing by pulling it straight out.
5. Insert a new bulb in the holder. It can only
be inserted in one way.
6. Press the bulb holder into position in the
headlight housing.
Models with optional Active Bending Lights only.
1
09 Maintenance and specifications
7. Reconnect the wiring connector to the
bulb holder.
8. Put the cover back into position and rein-
stall the headlight housing.
Turn signals
1. Remove the headlight housing from the
vehicle (see page 336).
2. Remove the bulb holder by turning it
counterclockwise and pulling it out of the
headlight housing.
3. Pull out the holder to access the bulb.
4. Remove the burned out bulb by pressing
it in slightly and turning it counterclock-
wise.
Replacing bulbs
5. Press the new bulb into the holder and
turn it clockwise.
6. Reinsert the bulb holder into the headlight
housing and turn it clockwise.
7. Reinstall the headlight housing.
Rear fog lights
The rear fog lights can be reached from
behind the bumper
1. Remove the bulb holder by turning it
counterclockwise.
2. Remove the burned out bulb by pressing
it in and turning it counterclockwise.
09
}}
339