Volvo XC60 Owner's Manual page 196

04 Driver support
Blind Spot Information System (BLIS)*
04
The vehicle is pulled far into a parking space
CTA's blind area
CTA's "field of vision"
Generic illustration
2
*
194
Option/accessory, for more information, see Introduction.
In angled parking spaces, CTA may be "blind" on
one side
However, as you back your vehicle out of a
parking space, CTA's "field of vision"
expands.
Examples of other limitations include:
•
Dirt, ice or snow obstructing the sensors
may reduce the system's function or
make it impossible to detect other vehi-
cles or objects.
•
Do not attach tape, decals, etc., on the
surface of the sensors (see the illustration
in the following "Maintenance" section).
•
BLIS and CTA are deactivated if a trailer's
wiring is connected to the vehicle's elec-
trical system.
Maintenance
Location of the BLIS/CTA sensors
The BLIS/CTA sensors are located on the
inside of the rear fenders/bumper.
The surfaces in front of the sensors must be
kept clean for the system to function opti-
mally.
CAUTION
Repairs to the BLIS/CTA systems should
only be done by a trained and qualified
Volvo service technician.
2