Digital Audio Output - Toshiba 40RL900A Owner's Manual

CONTROLS AND FEATURES
c
Press B or b to select AV Connection.
Preferences
REGZA-LINK Setup
Network Setup
Network Device Setup
Teletext
Network Lock
Panel Lock
Display Settings
AV Connection
d
Press OK to display the AV Connection
menu.
e
Press B or b to highlight Input Labeling
and press OK.
AV Connection
Input Labeling

Digital Audio Output

f
Press B or b to select Input Labeling and
press OK.
Input Labeling
Input
EXT 1
EXT 2
HDMI 1
HDMI 2
HDMI 3
PC
g
Press B or b to select the item you want
to label, and then press C or c to select --,
Amplifi er, Cable, DVD, Game, PC, Recorder
or Satellite.
h
Repeat step 7 for other video inputs.
Digital Audio Output
When connecting a surround sound amplifi er to the
digital audio output (Sony/Philips Digital Interface
Format [S/PDIF]), the following options can be
selected or adjusted.
a
In the Preferences menu, press B or b to
select AV Connection and press OK.
b
Press B or b to select Digital Audio
Output.
AV Connection
Input Labeling
Digital Audio Output
c
Press OK to display Digital Audio Output
menu and press B or b to select an option.
Auto
Off
Off
Label
--
--
--
--
--
--
54
Audio Format:
Press C or c to select PCM or Auto.
PCM: This mode outputs PCM format
to the digital audio output
socket.
Auto: This mode outputs Dolby Digital
(if available) or PCM to the digital
audio output socket.
Dolby Digital S Dolby Digital
Dolby Digital Plus S Dolby Digital
MPEG S PCM
HE-AAC S Dolby Digital
Audio Delay:
Press C or c to select Auto or Manual.
Auto: This mode automatically adjusts
the audio timing to meet the
video timing.
NOTE: The time lag might
be large between the image
and sound depending on the
connected equipment (amplifi er
etc.). In that case, select Manual.
Manual: You can manually adjust the
audio signal timing to meet the
video signal timing.
Delay Adjustment:
Press C or c to adjust the audio signal
timing (0 – 250ms) to meet the video signal
timing.
NOTE:
• This feature is grayed out when
Delay is in Auto.
• A time lag will occur when the video signal
or audio signal is changed. Adjust the
timing accordingly.
• When adjusting the timing, turn down the
volume of the AV equipment used as far
as possible. Depending on the equipment,
noise etc. may occur when the signal is
changed.
• Depending on the connected equipment
(amplifi er, etc.), adjustment may not be
possible.
• When the optical digital output setting
(Auto t PCM) is changed, it may be
necessary to adjust the timing again.
• Do not use other than for audio output
from the AV amplifi er, etc. (Malfunction
may occur)
Audio