System Information And Reset Tv; System Information; Reset Tv; Pc Settings - Toshiba 40RL900A Owner's Manual

CONTROLS AND FEATURES

System Information and Reset TV

System Information

This feature can be used to check the version of
software currently installed. When in DTV mode,
it includes additional diagnostic information such
as signal strength, signal quality, centre frequency,
modulation, etc.
a
In the System Setup menu, press B or b to
select System Information.
b
Press OK to display the System
Information.
System Information
WEAK
CH 25
CH 33
CH 67
c
For information about the signal quality of a
particular multiplex, press B or b to select
that multiplex.
d
Press OK for a screen showing detailed
technical information about the selected
multiplex.

Reset TV

Selecting Reset TV will reset all TV settings, including
saved channels, to their original factory values.
a
In the System Setup menu, press B or b to
select Reset TV.
b
Press OK to select. A screen will appear
warning that all settings will be lost. Press
OK to continue.
When the set powers back on, the Quick
Setup screen will appear. Press OK to
advance the setup and perform an auto
tune. (See "Quick Setup" section on page 16.)
TOSHIBA
2012
6.8.05.1 Jan 19 2012 - 53. 5. 73. 5
MBOOT Version : xxxxxxxx
MFC Version : xxxxxx
AVERAGE STRONG

PC Settings

Horizontal and Vertical Position

Connect the PC (as shown in the 'Connecting a
computer' section) and ensure that a picture is
showing on the television screen. The picture position
may now be adjusted to suit personal preference.
a
Press MENU / C c to highlight Setup icon.
b
Press B / C c to highlight Preferences icon
and press OK.
c
Press B or b to select Display Settings and
press OK.
d
Press B or b to select PC Setting and press
OK.
Display Settings
Auto Format
4:3 Stretch
Picture Position
GOOD
PC Settings
GOOD
GOOD
e
Press B or b to select an option and press C
or c to adjust the settings.
PC Settings
Horizontal Position
Vertical Position

Clock Phase

Sampling Clock
The Clock Phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
a
In the Display Settings menu, press B or b
to select PC Settings and press OK.
b
Press B or b to select Clock Phase.
c
Press C or c to adjust until the picture
clears.
52
On
Off
0
0
0
0
Reset
Clock Phase
picture blur.