Headers - Intel G41 Express Chipset User Manual

Two hard disks can be connected to each connector. The first HDD is
referred to as the "Master" and the second HDD is referred to as the "Slave".
For performance issues, we strongly suggest you don't install a CD-ROM or
DVD-ROM drive on the same IDE channel as a hard disk. Otherwise, the
system performance on this channel may drop.
(9) Serial-ATA Port connector: SATA1 / SATA2
These connectors support the provided Serial ATA and Serial ATA2 IDE hard disk
cable to connecting the motherboard and serial ATA hard disk.
(10) Serial COM Port: COM1
COM1 is the 9-pin connector. The On-board serial port can be disabled through
BIOS SETUP.
(11) VGA Connector (15-pin D-Sub) Connector: VGA
VGA is the 15-pin D-Subminiature female connector for display monitor.

3-2 Headers

(1) Line-Out/MIC Header for Front Panel (9-pin): AUDIO1
This header is connected to Front Panel Line-out, MIC connector with cable.
IDE1
Pin 1
IDE Connector
SATA2
Serial-ATA1 & 2 Compatible Connectors
AUDIO
2
Pin 1
Line-Out, MIC Headers
9
SATA1
10
9