Wireless (Ica-108W Only) - Planet ICA-108 User Manual

HTTP Port: The device supports two HTTP ports. The first one is default port 80 and this port
is fixed. This port is very useful for Intranet usage. The second HTTP port is changeable.
Users could assign the second port number of http protocol, and the WAN users should follow
the port number to login. If the http port is not assigned as 80, users have to add the port
number in back of IP address. For example: http://192.168.0.20:80.
If multiple devices are installed on the LAN and also required to be accessed from the WAN,
then the HTTP Port can be assigned as the virtual server port mapping to support multiple
devices.
Video Port: Specify the transmission port number of video stream. The default value is 5000.
User can specify a number between 1024 and 65535.
Audio Port: The Audio port value is equal to Video port plus one and it cannot be modified by
user manually. (The function is useless in this model)
When the configuration is finish, please click "OK" to save and enable the setting.

3.5.2 Wireless (ICA-108W only)

If your device is a wireless model, you could assign the related parameters into wireless
setting. Using a wired connection ensures greater secrecy while making these settings. These
settings should always be made in the camera first and secondly in the wireless access point.
This ensures that the camera is always accessible when making changes. Note that this
function is only available for the model with WLAN capability.
"Wired (Ethernet) only" or "Auto – wired if cable connected, otherwise wireless" :
Choose wired or wireless mode. However, note that wired is priority.
Type: To select one of WLAN modes from Infrastructure or Ad-Hoc mode.
Security mode: Shows which type of security the network uses. The device supports three
security methods: None/WEP/WPA-PSK (recommended method)
30/65