Chapter 1. Introduction Thank you for purchasing the ICA-108/ICA-108W. It is versatile and high image solution of surveillance application for day and night. The ICA-108/ICA-108W is also a stand-alone camera system with a built-in processor and web server that provides highest quality video and system performance. 1.1 Before Installation Before installation, please be sure to read this quick installation guide and user’s manual (CD) carefully to complete machine installation.
Chapter 2. Physical Installation 1. Connect an Ethernet cable Connect the LAN cable on the ICA-108/ICA-108W to the network device (hub or switch). 2. Attach the antenna (ICA-108W only) Finds antenna in accessory and attaches the antenna to the ICA-108W SMA connector.
Chapter 3. IP Wizard This chapter shows how to quick set up your ICA-108/ICA-108W. The ICA-108/ICA- 108W is with the default settings. However to help you find the networked camera quickly the windows utility-IP Wizard can search the cameras in the network that shall help you to configure some basic setting before you started advanced management and monitoring.
Page 6
4. Please click “Next” to install with original settings, or you may click “Change…” button to modify the install folder then press “Next” to continue. 5. Please click “Install” to start the installation.
Page 7
6. Please click “Finish” to complete the installation 7. Please double-click the utility icon ICA-108 utility. 8. Press “Search” button. IP Wizard will list all IP Cameras in your LAN environ- ment: on the desktop then you will see the...
3.2 Wizard function Please select your ICA-108 and press “Wizard”. The utility featured of “Wizard” function to help user to initial ICA-108. User can setup IP address, username and password step by step. Note Please enter User Name and Password. Default Username is: admin, leave password blank.
3.3 Username and Password You may change the ID and assign a new password to your ICA-108 or keep the original and press “Next” to continue. As below, you can select “Static IP” and enter the IP settings. Or select “DHCP ON” when there is a DHCP server in your network.
Chapter 4. Cam Viewer Installation This chapter will guide you to install the central management software. The ICA- 108/ICA-108W can be managed through its web interface. However, to central control, manage or record the cameras installed in the network Cam Viewer, the windows-based central management software are required.
Page 11
3. The welcome screen will display on the screen, please click “Next”. 4. Please read the license agreement and then check “I accept the terms of the license agreement” if you are agreed and click “Next” to continue the installation...
Page 12
5. Please key in user name and company name for which you want and click “Next” to continue installation. 6. Check the option “Complete” – all program features will be installed (Requires the most disk space) and click “Next” to continue installation.
Page 13
7. “Ready to Install the Program” will appear to prompt you to start the installation. Please click “Install” to start. 8. Please click “No” to finish the Cam Viewer Lite installation. In above step, when Cam Viewer works with MBM5 (Motherboard Monitor 5), Cam Viewer will display CPU temperature and fan speed.
Appendix A: Feature Listing for Cam Viewer Software Version IP Camera Input Dual Monitor Smart Guard I/O Device Hotline Address Book Log Viewer Counting Application Remote Playback Server Concurrent Playback Counting Function Smart Search Remote Live Viewer *Remark: Refer to Appendix B for more Cam Viewer Lite (Free Bundle version) (30-day Trial version)*...
Appendix B: Suggest Hardware / System Requirement Total FPS ~600 Intel Core 2 Duo QX6800 4 GB Chipset of Intel 946 or 965 chip, Intel Chipset recommended Motherboard VGA Card Ethernet 100 Base-TX or Above, Gigabit LAN recommended Hard Disk O.S.