GMC Sierra 2014 Owner's Manual page 67

Storing Memory Positions
To save positions to the 1 and 2
buttons:
1. Adjust the driver seat, outside
mirrors, and adjustable pedals
(if equipped) to the desired
driving positions.
2. Press and hold SET and 1 at
the same time until a beep
sounds.
3. Repeat Steps 1 and 2 for a
second driver using 2.
To save positions to the
button and easy exit features:
1. Adjust the driver seat, adjustable
pedals (if equipped), and the
outside mirrors on some vehicles
to the desired positions for
getting out of the vehicle.
2. Press and hold SET and
the same time until a beep
sounds.
Manually Recalling Memory
Positions
If the vehicle is off, or in ON/RUN/
START but not in P (Park), press
and hold "1," "2," or
recall the previously stored memory
positions. Releasing "1, "2," or
before the stored positions are
reached stops the recall.
If the vehicle is in ON/RUN/START
and in P (Park), press and release
1, 2, or
previously stored memory positions.
(Exit)
Placing the ignition in OFF/LOCK
before the stored positions are
reached stops the recall.
If something has blocked the driver
seat and/or adjustable pedals while
recalling a memory position, the
recall may stop. Remove the
obstruction; then press and hold the
at
appropriate manual control for the
memory item that is not recalling for
two seconds. Try recalling the
memory position again by pressing
the appropriate memory button.
to manually
to manually recall the
Seats and Restraints
If the memory position is still not
recalling, see your dealer for
service.
Automatically Recalling Memory
Positions (Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver s previously stored
1 or 2 position when entering the
vehicle.
If the Auto Memory Recall feature is
enabled in the vehicle
personalization menu, memory 1
or 2 positions are recalled in the
following ways:
Press on the RKE transmitter
and open the driver door.
Press on the RKE transmitter
when the driver door is
already open.
See Vehicle Personalization on
page 5-45.
3-7