GMC Sierra 2014 Owner's Manual page 170

5-34 Instruments and Controls
economy for the most recently
traveled selected distance.
Displayed below the bar graph is
the best average fuel economy that
has been achieved for the selected
distance. The selected distance is
displayed at the top of the page as
last xxx mi/km. Next to the
odometer, the Active Fuel
Management displays the number of
cylinders the vehicle is running on.
See Active Fuel Management
page 9-32.
Press to select the distance or
reset best value. Use
choose the distance and press
Press and to select Reset
Best Score. Press to reset the
best average fuel economy. After
reset, the best value displays - - -
until the selected distance has been
traveled.
The display provides information on
how current driving behavior affects
the running average and how well
recent driving compares to the best
that has been achieved for the
selected distance.
Timer: This display can be used as
a timer. To start the timer, press
while this display is active. The
display will show the amount of time
that has passed since the timer was
last reset. To stop the timer, press
briefly while this display is active
®
on
and the timer is running. To reset
the timer to zero, press and hold
while this display is active, or press
and select reset.
and to
Speed Limit: Shows sign
.
information, which comes from a
roadway database in the onboard
navigation.
Engine Hours: Shows the total
number of hours the engine has run.
This display may also show idle
hours, which show how long the
engine has been at idle.
Transmission Fluid
Temperature: Shows the
temperature of the automatic
transmission fluid in either degrees
Celsius (°C) or degrees
Fahrenheit (°F).
Trailer Brake: On vehicles with the
Integrated Trailer Brake Control
(ITBC) system, the trailer brake
display appears in the DIC.
TRAILER GAIN shows the trailer
gain setting. This setting can be
adjusted from 0.0 to 10.0 with either
a trailer connected or disconnected.
OUTPUT shows the power output to
the trailer any time a trailer with
electric brakes is connected. Output
is displayed in 0 to 10 bars. Dashes
may appear in the OUTPUT display.
Maintenance Due: Shows how
many kilometers (miles) until the
next maintenance is needed. This
display can be reset by pressing
and holding , or by pressing
and selecting reset. See
Maintenance Schedule on
page 11-3.
Blank Page: Shows no
information.