Displaying The Number Of Waiting Calls/Overload Display; Using Another Telephone Like Your Own For A Call - Siemens HiPath 500 User Manual

Step by Step
PIN and Authorization
Temporary Phone
Change PIN
Displaying the number of waiting calls/
overload display
You can show the number of external waiting calls on
the display if you programmed the "View number of
calls" key
R
Press the " Calls in Q" key.
If the number of waiting calls exceeds a preset limit
while you are engaged in another call (overload), the
LED on the key lights up. Contact your service person-
nel to find out the waiting call limit.
• LED off: There are no waiting calls.
• LED is flashing slowly: The set limit has been rea-
ched.
• LED is flashing quickly: The limit has been exceeded
(overload).
Using another telephone like your own
for a call
Other parties can temporarily use your phone like their
own for an outgoing call.
N
Open the Program/Service menu
g
Select and confirm the option shown.
Select and confirm the option shown.
j
Enter the number of the other user.
j
Enter the other user's code
if nec.
If the other user has not set a PIN, he or she is prompt-
ed to do so on his or her phone.
j
Dial the external number.
This state is canceled as soon as the call is ended.
Your old and new telephone are the first telephones at
each connection. The telephones are in idle state.
[1] "Differing display view in a HiPath 4000 environment (not for
HiPath 500)"
page 72.
page 88.
page 127
More functions/services
page 28.
[1]
.
93