Answering Calls From The Entrance Telephone; And Opening The Door - Siemens HiPath 500 User Manual

Enhanced phone functions
Step by Step
Open door
More features
Open door
48

Answering calls from the entrance telephone

and opening the door

If an entrance telephone has been programmed, you
can use your telephone to speak to someone at the en-
trance telephone and to activate a door opener.
If you have the proper authorization (contact your ser-
vice personnel), you can activate the door opener, en-
abling visitors to open the door themselves by entering
a 5-digit code (using a DTMF transmitter or installed
keypad).
Speaking to visitors via the entrance telephone
Prerequisite: Your telephone rings.
^
Lift the handset within thirty seconds. You are connect-
ed to the entrance telephone immediately.
or
^
Lift the handset after more than thirty seconds.
j
Dial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone
Confirm.
Opening the door from your telephone without
calling the entrance telephone
N
Open the Program/Service menu
g
Select and confirm the option shown.
Select and confirm the option shown.
j
Dial the entrance telephone number.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) page 117!
page 28.