Speed Control - Dodge charger 2013 User Manual

SPEED CONTROL

• The speed control switches are located on
the steering wheel.
Cruise ON/OFF
• Push the ON/OFF button to activate the
Speed Control.
CRUISE READY
•
strument cluster to indicate the Speed
Control is on.
Push the ON/OFF button a second time to
•
turn the system off.
Set
• With the Speed Control on, push and release
the SET – button to set a desired speed.
Accel/Decel
• Once a speed is set, pushing the RES +
button once or the SET – button once will increase or decrease the set speed approxi-
mately 1 mph (2 km/h).
Push and hold the RES + button to accelerate in 5 mph (8 km/h) increments or push and
•
hold the SET – button to decelerate in 5 mph (8 km/h) increments; release the button to
save the new set speed.
Resume
• To resume a previously selected set speed in memory, push the RES + button and release.
Cancel
• Push the CANCEL button, or apply the brakes to cancel the set speed and maintain the set
speed memory.
Push the ON/OFF button to turn the system off and erase the set speed memory.
•
Adaptive Cruise Control (ACC)
• If your vehicle is equipped with adaptive cruise control the controls operate exactly the
same as the standard cruise control with one difference. You can set a specified distance
you would like to maintain between you and the vehicle in front of you.
If the ACC sensor detects a vehicle ahead, ACC will apply limited braking or acceleration
•
automatically to maintain a preset following distance, while matching the speed of the
vehicle ahead.
If the sensor does not detect a vehicle directly ahead of you, it functions like a standard
•
cruise control system, maintaining the speed you set.
OPERATING YOUR VEHICLE
will appear on the in-
29