Dodge journey 2013 User Manual page 18

Dodge journey 2013
Hide thumbs Also See for journey 2013:
Table of Contents

Advertisement

GETTING STARTED
Installing The Child Restraint Using The Vehicle Seat Belts
• To install a child restraint, first, pull enough of the seat belt webbing from the retractor to
route it through the belt path of the child restraint and slide the latch plate into the
buckle.
• Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract
into the retractor. Finally, pull on any excess webbing to tighten the lap portion around the
child restraint. Any seat belt system will loosen with time, so check the belt occasionally,
and pull it tight if necessary.
• Route the tether strap to provide the most direct path for the strap between the anchor
and the child seat, preferably between the head restraint posts underneath the head
restraint.
• Attach the tether strap hook of the child restraint to the tether anchor and remove slack
in the tether strap according to the child restraint manufacturer's instructions.
NOTE:
Ensure that the tether strap does not slip into the opening between the seatbacks as you
remove slack in the strap.
In a collision, an unrestrained child, even a tiny baby, can become a projectile inside
the vehicle. The force required to hold even an infant on your lap could become so
great that you could not hold the child, no matter how strong you are. The child and
others could be severely injured or killed. Any child riding in your vehicle should be in
a proper restraint for the child's size.
Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a
front passenger air bag. An air bag deployment could cause severe injury or death to
infants in this position.
Improper installation of a child restraint to the LATCH anchorages can lead to failure
of an infant or child restraint. The child could be severely injured or killed. Follow the
manufacturer's directions exactly when installing an infant or child restraint.
An incorrectly anchored tether strap could lead to increased head motion and
possible injury to the child. Use only the anchor positions directly behind the child
seat to secure a child restraint top tether strap.
16
WARNING!

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents