Bluetooth ® Operations - Panasonic SC-NE5 Operating Instructions Manual

Bluetooth
®
By using the Bluetooth
system wirelessly.
≥Refer to the operating instructions of the Bluetooth
Pairing Bluetooth
Preparation
≥ Turn on the Bluetooth
place the device near the speaker unit.
≥ If this system is already connected to a
Bluetooth device, disconnect it.
®
1
Press [ , AUX] to select "BLUETOOTH".
≥ If "PAIRING" is indicated on the display, go to step 3.
2
Press [PLAY MENU] to select "NEW DEV." and
then press [OK].
{. "PAIRING" is indicated on the display.
3
Select "SC-NE5" from the Bluetooth
Bluetooth menu.
®
4
Start play on the Bluetooth
≥ If prompted for the passkey, input "0000".
≥ You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Connecting a paired Bluetooth
device
Preparation
≥ Turn on the Bluetooth
place the device near the speaker unit.
≥ If this system is already connected to a
Bluetooth device, disconnect it.
®
1
Press [ , AUX] to select "BLUETOOTH".
{. "READY" is indicated on the display.
2
Select "SC-NE5" from the Bluetooth
Bluetooth menu.
®
{. The name of the connected device is indicated on the
display for 2 seconds.
3
Start play on the Bluetooth
≥ This system can only be connected to one device at a time.
≥ When "BLUETOOTH" is selected as the source, this system
will automatically try and connect to the last connected
Bluetooth device.
®
≥ The Bluetooth device will be disconnected if a different
®
audio source (e.g., [CD]) is selected.
16
16
VQT4X66
operations
connection, you can listen to the sound from the Bluetooth
®
devices
®
feature of the device and
®
®
device.
®
feature of the device and
®
®
device.
®
device for details.
®
Bluetooth
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
≥ Press [
≥ If a Bluetooth
disconnect it.
1
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [3, 4] to select the mode and then
press [OK].
device's MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
≥ The default setting is "MODE 1".
Bluetooth
If the sound input level of the Bluetooth
transmission is too low, change the input level
setting.
®
Preparation
≥ Connect a Bluetooth
1
Press [PLAY MENU] repeatedly to select
"INPUT LEVEL".
2
Press [3, 4] to select the level and then press
[OK].
"LEVEL 0"
^-------------------------------------------------J
device's
≥ Select "LEVEL 0" if the sound is distorted.
≥ The default setting is "LEVEL 0".
Disconnecting a Bluetooth
1
While a Bluetooth
Press [PLAY MENU] to select
"DISCONNECT?".
2
Press [3, 4] to select "OK? YES" and then
press [OK].
audio device from this
®
transmission mode
®
, AUX] to select "BLUETOOTH".
device is already connected,
®
input level
®
device.
®
"LEVEL i1" "LEVEL i2"
,. ,.
device is connected:
®
®
device
®