Gateway - Toshiba e-studio 45 Operator's Manual

4
4-10 Setting up the GA-1040 from a Windows Computer

Gateway

If your TCP/IP network has a gateway, and users outside the gateway print to the
GA-1040 using TCP/IP, enter the gateway address. Obtain the correct gateway address
from your network administrator.
—Use this option to get the gateway address automatically for printing with
IP Auto
TCP/IP. This option is available only if you selected DHCP or BOOTP as the
protocol.
If you select a DHCP or BOOTP protocol and later change it to RARP, you must
return to Gateway Setup and set Get Gateway Address Automatically to No. You can
then set the address manually. This is because RARP does not support automatic
assignment of the gateway address.
—This option is available only if you answered No to Get Gateway Address
IP Static
Automatically, or if you selected RARP as the protocol. Use this option to set the
gateway address for printing with TCP/IP. If your network uses a gateway, you must
change the default to a correct gateway address for your network.
T A T
O CONFIGURE PPLE ALK
• Click the Protocol2 tab in the Network Setup window.