Disabling Night Latch Mode; Enabling / Disabling Night Latch Mode (From Ac Remote); Enabling Passage Mode - Trane ELECTRONIC MORTISE LOCK Owner's Manual

1.3.2. Disabling Night Latch Mode

1
Press Twice
Away
Home
Passage
Night Latch
1. Press inside activation button two times to activate lock*. See these indications:
Three Beeps
. Press night latch button in less than ten seconds to disable night latch mode. On successful
operation, lock will be in normal mode. See these indications:
One Beep

1.3.3. Enabling / Disabling Night latch Mode (from AC Remote)

1. Press on remote to activate or deactivate night latch mode on lock. Night latch will show on
remote display after it has been activated (approximately 0 seconds for display to update).
. Night latch mode operates only when Lock and AC are connected on network.
. Refer AC manual for remote features.

1.3.4. Enabling Passage Mode

1
Press Twice
Away
Home
Passage
Night Latch
1. Press inside activation button two times to activate lock*. See these indications:
Three Beeps
. Press passage button in less than ten seconds to enable passage mode. On successful
activation, see these indications:
Three Beeps
* Press two times in less than two seconds.
Beeps only when audio is enabled.
†
9
2
Away
Home
Passage
Night Latch
†
IN
N ight latch button blinks one time in red colour
†
AC Remote
e
Display
2
Press Once
Away
Home
Passage
Night Latch
†
IN
Passage button blinks three times in green colour
†
Press Once
I nside activation button blinks three times
in orange colour
I nside activation button blinks three times
in orange colour
4000994
Contents