Disabling Passage Mode; Home Connect Operations; Away Mode - Trane ELECTRONIC MORTISE LOCK Owner's Manual

1.3.5. Disabling Passage Mode

1
Press Twice
Away
Home
Passage
Night Latch
1. Press inside activation button two times to activate lock*. See these indications:
Three Beeps
. Press passage button in less than ten seconds to disable passage mode. On successful operation
lock will be in normal mode and see these indications:
One Beep

1.4. home Connect Operations

User operations 1.4.1 and 1.4.2 are part of home connect solution (tRANE Lock and tRANE Residential
air conditioners). Make sure that lock and air conditioner(s) are connected to tRANE network to ensure
that the user operations work as mentioned in 1.4.1 and 1.4.2. Refer AC user guide for procedure to
connect lock and air conditioner(s). Refer AC user guide for AC Audio - Visual indications.

1.4.1. Away Mode

In this mode lock will switch off all the TRANE air conditioner(s) which are ON.
1
Press Twice
Away
Home
Passage
Night Latch
1. Press inside activation button two times to activate lock*. See these indications:
Three Beeps
. Press away button to enable away mode in less than ten seconds. See these indications:
One Beep
. On successful operation air conditioner(s) will be in stand by and see these indications:
Three Beeps
Three Beeps
Note: This function applicable for lock purchased with TRANE air conditioner(s).
#
* Press two times in less than two seconds.
Beeps only when audio is enabled.
†
10
2
Press Once
Away
Home
Passage
Night Latch
†
IN
Passage button blinks one time in green colour
†
2
Press Once
Away
Home
Passage
Night Latch
†
IN
Away button blinks one time in red colour
†
†
IN
A way button blinks three times in red colour
†
I nside activation button blinks three times
in orange colour
I nside activation button blinks three times
in orange colour
I nside activation button blinks three times
in green colour
4000994
Contents