Toshiba 40L53** DIGITAL Series Owner's Manual page 68

h are the colours wrong when an
Q
C source is pla ed
Connect the NTSC source via a SCART
cable and play. Select Manual setting
A
from the SETUP menu and set the Col-
our System to Auto.
Manual setting
Colour system: Auto
EXT 1
Select Change
hat can be done if the user-de ned
Q
password has been forgotten
Use the universal password 1276, then
A
change to a new number of your choice.
h don t the devices connected via
Q
D I operate properl
Make sure to use cables with the HDMI
logo ( ® ). Some early HDMI
A
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
h is the edia la er/D D picture in
Q
blac and white
Check the correct input has been cho-
A
sen: S-VIDEO or AV.
h did turn off b itself
Q
After roughly 15 minutes without any
A
input video signal at TV mode, the TV
will turn off to reduce power.
A
Save Back
OK RETURN
68