Supported DVI Resolutions ......... 37 Table of Contents Wireless LAN Transmitter Specifications .... 38 Safety Information ..........2 Licences .............. 38 Features ..............4 Stand Installation & Wall Mounting ....... 4 Disposal Information ........... 39 Antenna Connection..........5 REACH information ..........40 Turning On/Off the TV(**) ........
• Do not expose the TV to direct sunlight or do Safety Information not place open flames such as lit candles on the top of or near the TV. • Do not place any heat sources such as electric CAUTION heaters, radiators, etc.
Page 4
WARNING WALL MOUNTING WARNINGS Do not ingest the battery, Chemical Burn Hazard This product or the accessories supplied with the • Read the instructions before mounting your TV product may contain a coin/button cell battery. If the on the wall. coin/button cell battery is swallowed, it can cause •...
menu as EDID 2.1 or Auto EDID in order to watch Introduction HDR/HLG content, if the HDR/HLG content is received through an HDMI input. The source device should also Thank you for choosing our product. You’ll soon be be at least HDMI 2.0a compatible in this case. enjoying your new TV.
Antenna Connection Connect the aerial or cable TV plug to the aerial input (ANT) socket or satellite plug to the satellite input (LNB) socket located on the rear side of the TV. Rear side of the TV If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection.
Page 7
Other Connections If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them. When using the wall mounting kit Connector Type...
Turning On/Off the TV(**) Turning On/Off the TV(**) Connect power Connect power IMPORTANT: The TV set is designed to operate on IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket. 220-240V AC, 50 Hz socket. After unpacking, allow the TV set to reach the ambient After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the...
Inputs menu on the Home Screen, select the desired TV Control & Operation(**) source from the list and press OK. Changing Channels and Volume You can adjust the volume by using the Volume +/- buttons and change the channel in Live TV mode by using the Programme +/- buttons on the remote.
Remote Control(**) Standby: Quick Standby / Standby / On Numeric buttons: Switches the channel in Live TV mode, enters a number in the text box on the screen Language: Switches among sound modes (analogue TV), displays and changes audio language (digital TV, where available) Volume +/-: Increases/decreases the volume level Microphone: Activates the microphone on the remote if...
Page 11
Remote Control (**) Standby: Quick Standby / Standby / On Numeric buttons: Switches the channel in Live TV mode, enters a number or a letter in the text box on the screen Language: Switches among sound modes (analogue TV), displays and changes audio language (digital TV, where available) Mute: Completely turns off the volume of the TV Volume +/-...
If you did priorly connect your TV to the Internet via Initial Setup Wizard Ethernet a message will be displayed stating that you are connected. You can choose to continue with wired Note: Follow the on-screen instructions to complete the initial connection or change the network.
Page 13
which this information can also be viewed, in case 13. Chromecast built-in always available internet access is not available. Select your chromecast availability preference. If set as 9. Google Services On your TV will be detected as a Google Cast device and allow Google Assistant and other services to wake Select each to learn more about each service, such as your TV up to respond to Cast commands, even when...
Satellite(**) LNB Configurations: Set the parameters for LNB. For DiSEqC antenna type select the correct DiSEqC If the Satellite option is selected, the Antenna Type port corresponding to your satellite system. Set other screen will be displayed next. If you have a Direct parameters in accordance with your satellite system satellite system, you can proceed to the next step if necessary.
Screen. You can also select the Android TV Home and recommendations from streaming apps. In the option from the Inputs menu to switch to Home Discover tab recommendations from streaming Screen. To open the Inputs menu, press the Source services will be displayed. In the Apps tab, all the button on the remote or press the Menu button on the apps installed on your TV will be displayed and you remote when the TV is in Live TV mode, highlight the...
Page 16
Mute and Standby buttons. These buttons will Cookie Settings: Set your cookie setting function normally. preference for HBBTV services. No Signal Auto Power Off: Set the behaviour of Persistent Storage: Turn the Persistent Storage the TV, when no signal is detected from the currently function on or off.
Wow: Turn this function on and off. This function allows Record you to turn on or awaken your TV via wireless network. Record List: The recordings will be displayed if any Wol: Turn this function on and off. This function allows available.
Page 18
When the second channel is selected, the position of LCN: Set your preference for LCN. LCN is the Logical this channel will be replaced with the position of the Channel Number system that organises available first selected channel. You can press the Yellow button broadcasts in accordance with a recognisable channel and enter the number of the channel you want to select.
Page 19
tion. Highlight OK and press OK to proceed. Highlight on the remote. Highlight the desired channel/s on the Cancel and press OK to cancel. list and press OK to select/unselect. Input Source - Satellite Channel Swap: Replace the positions of the two selected channels in the channel list.
on the remote. Highlight the desired channel/s on the an operator installation. Set to General Satellite to list and press OK to select/unselect. watch other satellite channels, if you have performed a normal installation. Channel Swap: Replace the positions of the two selected channels in the channel list.
advertising ID, reset it and turn on/off the personalised Apps advertisings based on your interests. Using the options of this menu, you can manage the Factory reset: Reset all TV settings to the factory apps on your TV. defaults. Highlight Factory reset and press OK. Information on this operation will be displayed, Recently opened apps select Factory reset to proceed with resetting.
Page 22
Power Display Mode: Set the aspect ratio of the screen. Select one of the predefined options according to Sleep Timer: Define a time after which you want your preference. your TV to enter sleep mode automatically. Set as Off to disable. Advanced Video Picture Off: Select this option and press OK to DNR: Dynamic Noise Reduction (DNR) is the...
Page 23
this option and press OK to turn the ALLM function Sound Surround: Turn the surround sound feature on or off. on or off. HDMI RGB Range: This setting should be ad- Equalizer Detail: Adjust the equalizer values ac- justed according to input RGB signal range on cording to your preferences.
Page 24
Eject: Same as described above. Note: This feature has an effect only if input audio format is AC-4 or dolby audio processing is enabled. This effect Home Screen: Customise your Home Screen. Select only applies to TV loudspeaker output. channels which will be displayed on the Home Screen, DTS Virtual:X: This feature will enhance your sound enable/disable video and audio previews.
bootloader version, the source and brand of the TV, and of a connected device. Highlight Change name and connection type) from your device to a server located press OK again. Press OK again and use the virtual in Ireland. This data is collected and stored to ensure keyboard to change the name of the device.
To add a channel to one of the favourite lists, highlight they are available. Follow the on-screen information that channel in the channel list and press the Blue for accurate button functions. button. Favourite list selection menu will be displayed. Press the Record button to add a timer for the Highlight the list/s you want the channel to be added highlighted event in the guide.
increase bandwidth. These are optimised for smoother and faster HD video streaming, file transfers and wireless gaming. Use a LAN connection for quicker data transfer between other devices like computers. The transmission speed differs depending on the distance and number of obstructions between the transmission products, the configuration of these products, the radio wave conditions, the line traffic and the products that you use.
Page 28
media files in the root folder or in the selected folder Stop: Stop the playback. will be displayed. If there isn’t any media files of the Programme +: Switch to next file. selected type, the folder will be assumed as empty. In Programme -: Switch to previous file.
Menu Options Sound Settings: Display the sound settings menu. Press the Menu button to see available options while Sound Tracks: Set the soundtrack option if more then playing back or displaying media files. The content of one available. this menu differs depending on the media file type. Last Memory: Set to Time if you want to resume the Pause/Play: Pause and resume the playback or the playback from the position where it was stopped next...
ALL the data on it and its file system will be authors' rights. Toshiba asks you to respect the converted to FAT32. In most cases operation errors will intellectual property rights of third parties.
If any available, you can also edit or delete the timers The TV supports also ARC (Audio Return Channel) on this list. Highlight the timer of your choice and press feature. This feature is an audio link meant to replace the Red button to edit.
Google Cast works on Android and iOS. Make sure that your Software Update mobile device is connected to the same network as your TV. The menu options and namings for Google Cast function on Your TV is capable of finding and updating the software your Android device can differ from brand to brand and can automatically via Internet.
No picture / distorted picture AV and HDMI Signal • Make sure that the antenna is properly connected Compatibility to the TV. • Make sure that the antenna cable is not damaged. Source Supported Signals • Make sure that the correct device is selected as the input source.
Supported DVI Resolutions When connecting devices to your TV’s connectors by using a DVI converter cable (DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x480 800x600 1024x768 1280x768 1280x960 1360x768...
(**)The Bluetooth word mark and logos are registered ® Wireless LAN Transmitter trademarks owned by the Bluetooth SIG, Inc. and any Specifications use of such marks by Vestel Elektronik Sanayi ve Ticaret A.S. is under licence. Other trademarks and trade names are those of their respective owners. Max Output Frequency Ranges DVB is a registered trademark of the DVB Project.
Disposal Information The following information is only for EU-member states: Disposal of products The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres.
Restriction of Chemicals), entered into force on 1 June 2007. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.