Information - Toshiba Regza XF350 Series Manual

Questions and
Q
Why are there vertical stripes on the screen
when in PC mode?
A
The Sampling clock may need adjustment. Select
PC Setting from the SET UP menu, highlight
Sampling clock and adjust until the lines clear.
Q
Why are there horizontal stripes and/or
blurred images on the screen when in PC mode?
A
The Clock phase may need adjustment. Select PC
Setting from the SET UP menu, highlight Clock
phase and adjust until the picture clears.
Q
Why are there problems with text?
A
Good performance of text depends on a good
strong broadcast signal. This normally requires a
roof or loft aerial. If the text is unreadable or
garbled, check the aerial. Go to the main index
page of the text service and look for the User
Guide. This will explain the basic operation of text
in some detail. If further information is needed on
how to use text see the text section.
Q
Why are there no text sub-pages?
A
There are none broadcast or they have not yet
loaded. Press the l button to access.
(See text section).
Q
Why are the four coloured text numbers visible
but no text?
A
Text has been selected whilst viewing an external
source i.e. DVD or VCR. No text will appear on
screen or a box may appear stating no information
is available. Select a broadcasting channel and
TEXT
press to access.
Answers
Q
Why are the LEDs on the front of the television
flashing?
A
Check the table below.
LED indication
LED-2 LED-1
OFF Green (Solid)
OFF Red (Solid)
Green Red (Solid)
(Solid)
OFF RED Blinks
0.5 sec cycle
OFF Red Blinks
1 sec cycle
OFF 2 times
flashing with
2 sec interval
Q
Why are the colours wrong when an NTSC
source is played?
A
Connect the source via a SCART lead and play.
Select Manual setting from the SET UP menu.
Store
OK
MENU
a
Set the Colour to Auto. and exit.
b
Go to the Picture settings menu and adjust the
tint.
34
continued
Condition
The TV is operatin
properly.
Standby with Power-
On
On timer
Power protect
Turn OFF the TV
detection.
and unplug the
Abnormal operation
power cord. Plug
of BUS line.
the power cord in
Abnormal operation
again and turn ON
(Initialization error).
LED-2
Manual setting
Colour system: Auto.
EXT2 A V C R
Back Watch TV
EXIT
Solution
–
–
–
the TV.
LED-1