Toshiba Regza XF350 Series Manual page 28

HDMI setting
HDMI setting menu consists of the following 2 items (Deep
Color and Lip Sync). Some early HDMI equipment may not
work properly with your HDMI TV, please unplug your HDMI
cable first and then try setting the following options to Off.
Adjusting these settings should allow your early HDMI
source to operate properly with your television.
a
In the SET UP menu press
is highlighted, then press OK.
b
b
Press to highlight HDMI setting and press OK.
AV connection
PC/HDMI1 audio
HDMI1 audio
HDMI setting
EXT2 input
Woofer
Back
MENU EXIT
NOTE: The HDMI setting is grayed out on non-
HDMI inputs.
c
B b
Press or to select option, then press
select the settings.
Deep Color
Lip Sync
Back
MENU EXIT
Input selection and
AV connections
b
until AV connection
PC
Digital
OK
AV
Internal
Watch TV
C
or
HDMI setting
On
On
Watch TV
• Deep Color: On
This feature allows to HDMI source to increase available
colors bits within the boundaries defined by the RGB or
YCbCr colour space.
• Lip Sync: On
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices to
accurately perform synchronization automatically.
All above HDMI settings need proper HDMI source
device.
If HDMI source products does not support these features,
the television may not work properly by activating these
features.
NOTE: If your HDMI connection is capable of 1080p and/
or your television is capable of refresh rates greater than
60Hz or supports Deep Color, you will need a Category 2
cable. Conventional HDMI/DVI cables may not work
properly with this mode.
c
to
28
continued