Tty Operation - Motorola W372 User Manual

1 Place your phone near the device, and send the
file from the device.
If your phone and the sending device don't
recognize each other, place your phone in
discoverable mode so the sending device can
s
locate it. Press
2 Press Accept key on your phone to accept the file
from the other device.
Your phone notifies you when file transfer is complete.
If necessary, press Save to store the file.

TTY operation

You can use an optional TTY device with your
phone to send and receive calls. You must plug the
TTY device into the phone's headphone jack and set
the phone to operate in one of three TTY modes.
Note: Use a TSB-121 compliant cable (provided by the
TTY device manufacturer) to connect the TTY device
to the phone.
> Connection > Bluetooth Link > Find Me.
Note: Set the phone volume to level 4 (middle setting)
for proper operation. If you experience a high number
of incorrect characters, adjust the volume as needed
to minimize errors.
Note: For optimal performance, your phone should be
at least 12 inches (30 centimeters) from the TTY
device. Placing the phone too close to the device may
cause high error rates.
set TTY mode
When you set your phone to a TTY mode, it operates
in that mode whenever the TTY devices is connected:
Find it: s Z
> Settings > Initial Setup
1 Scroll to TTY Setup and press Change.
2 Scroll to one of the following TTY Setup options and
press Select.
option
Voice Set to standard voice mode.
TTY Transmit and receive TTY
characters.
connections 49