Table of Contents
Advertisement
Section 7 Power Management,
Suspend Time Out (Minute)
This option specifies the length of time the length of time the system needs to be inactive
before it enters suspend mode. The Optimal and Fail-Safe default settings is Disabled.
Option
Disabled
1Min
5Min
10Min
Throttle Slow Clock Ratio
In power management state, BIOS can throttle the CPU clock to reduce power
consumption. For example, a throttle ratio of 50% means the clock is turned off 50
percent of the time. The Optimal and Fail-Safe default settings is 50%.
Option
87.5%
75.0%
62.5%
50%
37.5%
25%
12.5%
Keyboard & PS/2 Mouse
FDC/LPT/COM Ports
Primary Master IDE
Primary Slave IDE
Secondary Master IDE
Secondary Slave IDE
Option
Monitor
Ignore
American Megatrends, Inc., Olympus III User's Guide (Series 875)
114
Continued
Description
This setting prevents the system from entering suspend mode. This is the
default setting.
This option allows the computer system to enter suspend mode after being
inactive for 1 minute.
This option allows the computer system to enter suspend mode after being
inactive for 5 minutes.
This option allows the computer system to enter suspend mode after being
inactive for 10 minutes.
Description
This setting allows the BIOS to throttle back the CPU clock to operate 87.5
percent of the time.
This setting allows the BIOS to throttle back the CPU clock to operate 75
percent of the time.
This setting allows the BIOS to throttle back the CPU clock to operate 62.5
percent of the time.
This setting allows the BIOS to throttle back the CPU clock to operate 50
percent of the time. This is the default setting.
This setting allows the BIOS to throttle back the CPU clock to operate 37.5
percent of the time.
This setting allows the BIOS to throttle back the CPU clock to operate 25
percent of the time.
This setting allows the BIOS to throttle back the CPU clock to operate 12.5
percent of the time.
Description
This value allows the Olympus III motherboard to wake up when one of
the device selected is used. This is the default value.
This value prevents the Olympus III motherboard from waking up when
the selected device is used.
Cont'd
Advertisement
Table of Contents
