SC213L Chassis Manual
4-15 Installing the Backplane
Installing the Backplane into the Chassis
1.
Ensure that all of the hard drive trays have been removed from the bays in
the front of the chassis and that the spring bar has been loosened as directed
in the previous section.
2.
Slide the backplane into the chassis, easing it into the clips on the floor of the
chassis.
3.
Allign the mounting holes in the backplane with the holes in the chassis.
Replace the two screws at the top of the backplane.
4.
Reconnect all cables and return the hard drive trays to their bays in the front
of the chassis.
Figure 4-18: Installing the Backplane
4-20
2