Table of Contents
Advertisement
4-8
Installing the Add-on Cards
Installing Add-on Cards
1.
Remove the chassis cover and ensure that the motherboard has been prop-
erly installed.
2.
Locate the vertical add-on card slots in the rear of the SC213L chassis.
3.
Remove the blank bracket which is pre-installed in the chassis.
4.
Simultaneously, slide the add-on card carefully into the bracket plugging it into
the slot on the motherboard.
5.
Screw the add-on card bracket onto the chassis.
Figure 4-8: Removing the Blank Add-on Card Bracket
6.
Secure the head of the riser card bracket to the rear of the chassis using the
two screws provided.
7.
Secure the tail of the riser card bracket to the fan tray with one screw pro-
vided.
Chapter 4: Chassis Setup and Maintenance
4-9
Advertisement
Table of Contents
