Speedy Cook; To Stop The Oven While The Oven Is Operating; Abnormal Messages; Arcing - Smeg SA985-2CX Owner's Manual

SPEEDY COOK

The speedy cook function allows the oven to being cooking immediately on full power.
The speedy cook button has been pre-programmed to increase in increments of 30 seconds up to a maximum time of 5 minutes.

TO STOP THE OVEN WHILE THE OVEN IS OPERATING

1. Open the door.
• Oven stops operating.
• You can restart the oven by closing the door and touching START/SPEEDY COOK button.
2. Press the STOP/CLEAR button.
• Oven stops operating.
• If you wish to cancel the cooking settings, press the STOP/CLEAR button again.
ABNORMAL MESSAGE

ARCING

If you see arcing, press STOP/CLEAR button and correct the problem.
Arcing is the microwave term for sparks in the oven. Arcing is caused by:
• Metal or foil touching the side of the oven.
• Foil not molded to food (upturned edges act like antennas).
• Metal, such as twist-ties, poultry pins, or gold rimmed dishes, in the microwave.
• Recycled paper towels containing small metal pieces being used in the microwave.
1. Press START/SPEEDY COOK button.
The oven will be " : 30" is displayed. MW indicator lights.
And the oven will start immediately. No need to press START/SPEEDY
COOK button.
The oven light comes on and the turn table starts rotaing and the time in the
display will count down in seconds.
• If the inside temperature of the oven is higher than expected or the
temperature sensor doesn't work properly, "Err 2" message will be
shown in the display.
• Unplug the power and call our technical service.
• When the temperature sensor is disconnected, "Err 3" message
will be shown in the display.
• Unplug the power and call our technical service.
18