Sony SLV-N88 Operating Instructions Manual page 61

Attaching the external antenna connector
When using a 300-ohm twin lead cable for a
VHF/UHF antenna, use the EAC-32 antenna
connector (not supplied) to connect the
antenna to the VCR.
300-ohm twin
EAC-32 antenna
1
Loosen the screws on the antenna connector.
2
Wmd the twin leads around the screws on the antenna connector.
3
Retighten the screws.
Attaching a UHF/VHF band mixer
When using both a 75-ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
antenna, use the EAC-66 UHF/VHF band
separator/mixer (not supplied) to connect the
antenna to the VCR.
s
300-ohm twin
EAC-66
UHFNHF
band
separator/
mixer (not
supplied)
75ohm coaxial
cable
1
Loosen the screws on the mixer.
2
Wind the twin leads around the screws on the mixer.
3
Retighten the screws.
4
Connect the 75ohm coaxial cable to the mixer.
J
General setup information
61