Sony SLV-N88 Operating Instructions Manual page 35

To watch another TV program while recording
1
Press TV/VIDEO to turn off the VIDEO indicator (or the VCR indicator for SLV-
N77 and SLV-N55) in the display window.
2
If your TV is connected to the VCR using A/V connections, set the TV to the
TV's antenna input; if not, skip this step.
3 Select another channel on the TV.
To save a recording
To prevent accidental erasure, break
off the safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
Tips
* To select a channel, you can use the number buttons on the remote commander. Enter the
channel number, then press ENTER.
a You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT
SELECT button.
-.
* The display appears on the TV screen indicating information about the tape, but the
information will not be recorded on the tape.
l
If you do not want to watch TV while recording, you can turn off the TV. When using a cable
P
$
box, make sure to leave it on.
t!i
: Notes
* The remaining tape length may not be indicated accurately for short tapes such as T-20 or T-
30, or tapes recorded in the LP mode.
l
,
The display does not appear during still (pause) mode or slow-motion playback.
l
It may take up to one minute for the VCR to calculate and display the remaining tape length
after you press DISPLAY.
Recording TV programs 35