Konica Minolta bizhub 185 User Manual page 13

1.3 Safety information
Power cord
• Do not scratch, abrade, place a heavy object on, heat, twist, bend,
pull on, or damage the power cord. Use of a damaged power cord
(exposed core wire, broken wire, etc.) could result in a fire or
breakdown.
Should any of these conditions be found, immediately turn OFF
the power switch, unplug the power cord from the power outlet,
and then call your authorized service representative.
Power source
WARNING
• Use only the power source voltage specified on the machine. Fail-
ure to do that could result in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appli-
ances or machines.
Use of a power outlet for more than the marked current value
could result in a fire or electrical shock.
• Do not use an extension cord in principle. Use of an extension
cord could cause a fire or electrical shock. Contact your author-
ized service representative if an extension cord is required.
CAUTION
• The outlet must be near the equipment and easily accessible. Oth-
erwise you can not pull out the power plug when an emergency
occurs.
Power plug
WARNING
• Do not unplug and plug in the power cord with a wet hand, as an
electrical shock could result.
• Plug the power cord all the way into the power outlet. Failure to do
this could result in a fire or electrical shock.
CAUTION
• Do not place any objects around the power plug, as the power
plug may be difficult to pull out when an emergency occurs.
• Do not tug the power cord when unplugging. Pulling on the power
cord could damage the cord, resulting in a fire or electrical shock.
• Remove the power plug from the outlet more than one time a year
and clean the area between the plug terminals. Dust that accumu-
lates between the plug terminals may cause a fire.
Grounding
WARNING
• Connect the power cord to an electrical outlet that is equipped
with a grounding terminal.
bizhub 185
1
1-7