Table of Contents
Advertisement
Maintenance
of the chain saw
Fig. 19
Daily maintenance
1. Clean the saw body from the outside.
2. Clean the air filter. Change
if necessary
11
16
3. Turn around
the guide bar, lower edge up. Clean the bar
groove.
4. Clean the fan and air intakes
in the starter cover.
5. Clean the cooling
fins on the cylinder
6. Clean the space under the clutch cover.
7. Sharpen
the chain and check its tension
8. Check the oiling system
for the chain and the guide bar.
9. Clean the chain brake. Make it a habit to lock the chain
brake during
pauses and transports.
Weekly
maintenance
10. Check the starter, its cord and return spring.
11. Clean the spark plug from the outside
and check the gap
Adjust the gap or change the plug If necessary.
12. File off burrs if any on the sides of the guide bar
13. Lubricate
the bearings
of the clutch drum.
Monthy maintenance
14. Wash out the fuel tank with petrol
15. Wash out the oil tank with petrol.
16. Clean the carburetor.
17. Clean the spark plug.
Fig, 20
Hide quick links:
Advertisement
Table of Contents
