Table of Contents
Advertisement
Some areas have laws restricting the mounting of any devices on the
windshield. Be sure to check your local laws before mounting the
Magellan RoadMate to the windshield.
Turn it on and go...
InstalL..
2
Clean the area where the adjustable mount will be
installed with an alcohol pad. If you are using the
adhesive disk apply it firmly to a flat, smooth area
or the dash. (Allow to cure for 24 hours.)
See the User Manual on the CD-ROM for additional
information on installation.
Please note: Accessories shown here may differ slightly from
the accessories provided with your Magellan RoadMate.
Signal Reception
Snap the adjustable mount into the
cradle. Attach the mount to the
windshield or the adhesive disk.
Attach the Magellan RoadMate to the
basic cradle.
Plug one end of the vehicle power
adapter to USB connector on the
Magellan RoadMate and the other in a
vehicle power receptacle.
For best signal reception, leave the garage or parking
structure to get a clear view of the sky.
Check the satell ite status ind icator in the upper
right corner of the Map screen for signal strength.
I
When the icon bars are green, the Magellan
.1
RoadMate is computing position information.
Residents of Hawaii and Puerto Rico
To use the Magellan RoadMate in Hawaii or Puerto Rico you
will need to select the proper map region. Region selection
can be found by accessing the Main Menu and tapping User
Options and then Region. See the User Manual for more
detai Is on changing regions.
Advertisement
Table of Contents
