Other Useful Functions - Epson EMP-7800 Quick Reference Manual

Other useful functions

Color Mode
Preset
Function
Freeze
Function
P in P
Function
Brightness
Control
Network
monitoring and
control
The colour mode
changes as follows
each time this button
Dynamic
is pressed.
The "Video" menu settings (such as input resolution and tracking) for the
respective preset number are retrieved each time this button is pressed.
(Adjustment is only possible when analogue RGB signals are being
input)
The images are paused and unpaused each time this button is
pressed.
This function lets you display separate images in a smaller screen
(sub-screen) over the top of the images that are currently being
projected (main screen).
This lets you set the lamp brightness to one of two settings. Select
"Low" if the images being projected are too bright such as when
projecting images in a dark room or onto a small screen.
This lets you monitor multiple projectors and turn their power on and
off and change the signal sources via a network.
In addition, if a problem occurs with the projector, the projector can
send an e-mail message to notify someone of the problem.
Presentation
Theatre
sRGB Living Room
User's Guide
"Selecting the Projection
Quality (Colour Mode
Selection)"
User's Guide
"Preset Function"
User's Guide
"Freeze Function"
User's Guide
"P in P (Picture in
Picture) Function"
User's Guide
"Advanced2 Menu"
User's Guide
"Projector Monitoring
and Control using a
Network"