Other Useful Functions - Epson EMP-8300 Quick Reference Manual

Other useful functions

Brightness
Control
Freeze
Function
P in P
Function
Standby
Monitor Out
Projector ID/
Remote
Control ID
Network
monitoring and
control
(EMP-8300 only)
This lets you set the lamp brightness to one of two settings. Select "Low"
if the images being projected are too bright such as when projecting
images in a dark room or onto a small screen. When used at low
brightness, the life of the lamp will be extended.
The images are paused and unpaused each time this button is pressed.
This function lets you display separate images in a smaller screen (sub-
screen) over the top of the images that are currently being projected
(main screen).
This function lets you select the input source for projected images while
viewing the image contents on an external monitor.
Images can be checked on an external monitor while using the "A/V Mute"
function and while the projector is not projecting images (while it is in
standby mode).
If using more than one projector at a time, such as at a show, you can
record ID numbers for the projectors and for the remote controls in order
to use a remote control to simultaneously operate only projectors with the
same ID number.
This lets you monitor multiple projectors and turn their power on and off
and change the signal sources via a network.
In addition, if a problem occurs with the projector, the projector can send
an e-mail message to notify someone of the problem.
User's Guide
"Advanced2 Menu"
User's Guide
"Freeze Function"
User's Guide
"P in P (Picture in
Picture) Function"
User's Guide
"Connecting to an
External Monitor"
User's Guide
"Projector ID/Remote
Control ID"
User's Guide
"Projector Monitoring
and Control using a
Network"