10. ASSEMBLY INSTRUCTIONS
1) Nokia N8-00 assembly.
3) When inserting the CAMERA MODULE, check that
the shown clip is on the same side as the guiding
notch. Press the CAMERA MODULE carefully to attach
the camera retaining clips.
5) Press the PWB SPACER ASSY along the edges with
the SS-93 to activate the adhesive.
23
2) For assembling you need the Nokia Standard
Toolkit version 2.
4) Place a new PWB SPACER ASSY to the ENGINE
BOARD by using the shown guiding pin.
6) Place the SUB PWB on top of the PWB SPACER ASSY.
Be careful not to damage the flex!
Confidential | Copyright © 2010 Nokia | All rights reserved
Nokia N8-00
RM-596
Service Manual Level 1&2
Version 3.0