10. ASSEMBLY INSTRUCTIONS
1) Nokia N8-00 assembly.
3) When inserting the CAMERA MODULE, check that
the shown clip is on the same side as the guiding
notch. Press the CAMERA MODULE carefully to attach
the camera retaining clips.
5) Press the SUB PWB SUPPORT along the edges with
the SS-93 to activate the adhesive.
2) For assembling you need the Nokia Standard
Toolkit version 2.
4) Place a new SUB PWB SUPPORT to the ENGINE
BOARD by using the shown guiding pin.
6) Place the SUB PWB on top of the SUB PWB
SUPPORT. Be careful not to damage the flex!
Nokia N8-00
RM-596
Service Manual Level 1&2