Blower And Optional Equipment - MHSC CFX24 Installation And Operating Instructions Manual

BLOWER and OTHER OPTIONAL EQUIPMENT
OPTIONAL EQUIPMENT
FORCED AIR KIT
If you are installing the forced air kit (Models BLO24-T or BLOT), see the installation instructions
provided with the kit for electrical wiring requirements or the blower installation section.
Model CFX24 uses blower model BLO24T.
Model CFX32 uses blower model BLOT.
The firebox must be connected to main power supply at time of firebox installation. The blower must
be installed prior to the installation of the unvented heater. The electrical connections must be made
before the firebox is framed and enclosed in the finished walls.
FIREBRICKS
Optional firebrick kits can be installed. Refer to installation instructions provided with kit or Page
14.
Electrical connections should only be
performed by a qualified, licensed electrician,
main power must be off when connecting to
main electrical power supply or performing
service.
20301726
CFX Vent Free Fireplace System
27