Initiating A Selective Call - Motorola ASTRO XTL 5000 User Manual

Initiating a Selective Call

To initiate a Selective Call, select a unit to call, then place the call.
1 Press
Call
The Call indicator lights, and the display shows the last
transmitted/received unit ID number.
2 Select a unit in one of the following ways:
• From the ID number list:
– Do nothing if you want to call the unit ID currently
displayed.
OR
– Use the prestored list by turning the Mode knob (W4) or
by pressing the Mode rocker switch (W5, W7, W9) to
locate the name/ID you want to call.
OR
– Press the Mode up
the keypad to directly advance to the desired list
member.
OR
– Enter, using the keypad, the ID of the desired unit.
Note: Using the keypad to enter the ID of another unit can only be
accomplished from the first display shown when CALL was
entered. If the list has been entered, scroll to the first display.
3 Press
Sel
A telephone-type ringing sounds if the unit you are calling is in
service. The display shows PLS WAIT (W4, W5, W7) or PLEASE
WAIT (W9).
ASTRO XTL 5000 Digital Mobile Radio with W4, W5, W7, and W9
.
rocker switch once, and then use
or the microphone PTT button.
Conventional Radio Features
67