Table of Contents
Advertisement
• Now that the appliance is in place and properly
hooked up to the chimney, you have to adjust the
level of the burner.
• Put the level on the burner flange parallel to the
door.
(Figure 9A).
adjustable legs to level the burner with a 7/16" or
10 mm key.
• Put the level on the burner flange parallel to the
sides.
(Figure 9B).
adjustable legs to level the burner with a 7/16" or
10 mm key
IMPORTANT :
IT IS VERY IMPORTANT THAT THE BURNER
ALWAYS STAND ON LEVEL TO ALLOW A
PROPER OIL VAPOR DISTRIBUTION THROUGH
THE RINGS, AND A BETTER OIL INLET.
• The appliance must be fixed in its location using
the two fixation brackets. Install the brackets on
the two back adjustable legs. (figure 11)
• If the flooring is made of combustible material it
would be preferable to install the appliance on
an non combustible surface covering at least to
the dimensions of the appliance.
LEVELLING THE APPLIANCE
Screw or unscrew the
Screw or unscrew the
FIXATION OF THE APPLIANCE TO FLOOR
Page 6 of 15
Figure 9A:
LEVELLING THE BURNER
Figure 9B:
LEVELLING THE BURNER
Figure 10:
INSTALLATION OF FIXATION
BRACKETS
Advertisement
Table of Contents
