Pairing Bluetooth Device With The Radio - Motorola APX 6000 User Manual



Pairing Bluetooth Device with the Radio

The range of Bluetooth operation is 10 meters line-of-sight
communication. This is an unobstructed path between the
location of the signal transmitter (your radio) and the location of
the receiver (your device or accessory).
Obstacles that can cause an obstruction in the line-of-sight
include trees, buildings, mountains, cars and etc.
It is NOT recommended that you leave your radio behind and
expect your accessory to work with a high degree of reliability
when they are separated.
At the fringe areas of reception, both voice and tone quality will
start to sound "garbled" or "broken". To correct this problem,
simply position the accessory and radio closer to each other
(within the 10 meter defined range) to re-establish clear audio
reception.
90
English
Procedure:
Note:
With your radio's Bluetooth feature ON, and the Bluetooth tones
enabled:
Bluetooth
Pairing
1
Location
2
3
Bluetooth tones, Bluetooth menu and Preprogrammed
buttons must be preprogrammed by a qualified radio
technician. Check with your dealer or system
administrator for more information.
Turn on the accessory, then place it close to your radio
aligning the Bluetooth Pairing Location on the radio to the
blue dot-pairing indicator on the accessory.
If the pairing process is successful, you hear an
incremental-pitched tone to indicate paired.
OR
If the pairing process fails, you hear a short, low-pitched
tone. The display shows Bluetooth pairing failed. Repeat
step 1 again.
The radio continues to connect to the device.
If the connecting process is successful, you hear an
incremental-pitched tone. The display shows <Device
Type> connected, and the Bluetooth icon turns from
a
.
OR
If the device already has pairing records and the connecting
process fails, you hear a short, low-pitched tone. The
display shows <Device Type> connect failed. Repeat
step 2 to reconnect the Bluetooth device.
b
to